Painting engine & gearbox mounts,differential ,suspension and steering

I managed to locate an original 3 speed manual gearbox, my 3 speed shifter bolted straight on, just need to locate a belhousing, flywheel and clutch.

Started  stripping and painting of the steering gear noting all the factory markings.

Same went for all the suspension components.

After all the metal componants were stripped of surface rust and paint the metal is treated so that there is no rust reisdue and the paint has a good base to adhere to.

This little rack system was so handy for hanging items while painting and drying.

Leaf springs were stripped down to individual leaves and treated and painted  with new teflon spacers inserted between the leaves.

All suspension repainted to original colour codes.

All factory markings were added back to componants

Steering rack and colomn repainted back to factory colours

Gearbox and engine mounts repainted

This took a while will need to finish off backing plates and all brakes before completeing the rear end.

All starting to look the part, can't wait till its time to put it all back together.

Floor pan repairs

                          I got a car rotisserie which will help with the work underneath the car, this I had to paint up and I did this at the same time as the motor.

                                    

Makes it real easy to remove all the front suspension when the car is on its side like this, really handy this rotisserie.

Really good steel under all this tar and old paint this body has been well preserved over the years.

With all the suspension removed and any brake and fuel lines its time to cut out the bits of rusty floor pan and replace with new steel.

Front floor rust not much for one of these cars seen alot worse.
Front floors and rear floors were only mildly rusted on opposite sides;  right hand front and left hand rear for some reason

Rusty rear scetion.

Doesn't look like much here but once you get into it you need to get back to the good metal but I still want to try and retain as much of the orginal steal as possible.

Cut section out, may ended up cutting more as it will be easier to weld in the bigger section and there was a few small holes that would have caused problems while welding.

Here is the new section ready to be welded in.

                          See view from underneath left rear floor new section to be welded in.

Right hand rear floor is great.

Drivers side floor as well.

Great underbody once the old paint is all removed it will clean up well, just a few floor repairs

 Note date stamps on Original sills, these are good and solid and will not need replacing.

Rear floor section welded in now.

And front section as well. In the following weeks i'm going to start stripping cleaning up all the chassis components then paint and underseal. Depends on the weather as it gets really cold in the garage at night.

A Tribute to Carroll Shelby

                                                         

                                                              www.carrollshelby.com

LEGENDARY ENTREPRENEUR CARROLL SHELBY PASSES AWAY

LOS ANGELES - May 11, 2012 - Carroll Shelby International, Inc., (OTC: CSBI.PK) announced today that

Carroll Hall Shelby, a man whose vision for performance transformed the automobile industry, has died

at age 89. Mr. Shelby passed away yesterday at Baylor Hospital in Dallas. The cause of death was not

disclosed.

Born on Jan. 11, 1923, Carroll Shelby was one of America’s greatest success stories. Championship-winning

racecar driver, “flying sergeant” wartime pilot, philanthropist, entrepreneur, car manufacturer and

racing team owner, he embodied the ingenuity, tenacity and grit to overcome any obstacle. He is perhaps

the only person to have worked at a visible level with all three major American automobile manufacturers.

Carroll Shelby founded Carroll Shelby International, a publicly held corporation involved in many industries.

His licensing arm has agreements with industry giants, such as Mattel, Sony, Ford Motor Company

and Electronic Arts. His car company, Shelby American, has a thriving parts business as well as a line

of muscle cars including the Shelby GT500 Super Snake, Shelby GT350 and Shelby GTS. The Las Vegasbased

company also manufactures a limited number of the 1960s Shelby 289 “street,” 289 FIA, 427 S/C

and Daytona Coupe Cobras.

Shelby considered his greatest achievement to be the establishment of the Carroll Shelby Foundation(tm).

Created in 1992 while Shelby was waiting for a heart transplant, the charity is dedicated to providing medical

assistance for those in need, including children, educational opportunities for young people through

automotive and other training programs and benefitting the Carroll Shelby Automotive Foundation.

Shelby remained active in the management of each of his companies and the Foundation until his death,

even though he endured both heart and kidney transplants in the last two decades of his life.

“We are all deeply saddened, and feel a tremendous sense of loss for Carroll’s family, ourselves and the

entire automotive industry,” said Joe Conway, president of Carroll Shelby International, Inc. and board

member. “There has been no one like Carroll Shelby and never will be. However, we promised Carroll we

would carry on, and he put the team, the products and the vision in place to do just that.”

Shelby is survived by his three children Patrick, Michael and Sharon, his sister Anne Shelby Ellison of Fort

Worth and his wife Cleo.

. For more information, visit www.shelbyamerican.com.

Engine painting

After stripping all the blue paint and clean all the oil & grease its time to paint back to original colours which were heat proof black engine block and heat proof ford red paint for the air filter & tappet cover.These colours were under the blue paint when I was stripping off the old engine paint..

Late 1965 Mustangs 6 cylinder motors were painted blue and a lot of these early 6's got the blue paint treatment to make them look like the later model

New water pump and maniflod gets a dark grey manifold heat proof paint and the engine decals on the oil cap & filter and air filter.

Next week back to work on the chassis and under body  and mounting the body onto a car rotisserie.

Windscreen and dash removal

next stage is to remove all the dash parts and the windscreen and clean up the front vent area.

Windscreen frames are in good shape. They still have the factory Vintage Burgandy red paint and it holding out well.

Time to start painting some of that bare metal. The firewall is treated and painted with first coat till I get back to it.

Under the dash these round vent holes normally rust out badly this one has survived very well, so i'll treat them and paint them up with a good coat of paint to help them last for the next 50 plus years.

Inside the vent area there is no signs of rust,

I have stripped off the paint to treat and paint as well.

Wiper motor and arms, note on the close up below the date 11 th june 1965

Heater and vents etc will also need to be cleaned up and painted etc.

Manual peddle assembly removed, will look for an automatic brake peddle to fit into this assembly and keep all the clutch and brake parts for when I locate a manual gearbox at a later date.

Original Radio works well although speaker will have to be replaced as the paperon the speaker cone is perished.

Next week strip and clean up the engine and paint.