Ford don't supply these Nylon Flanged Bushes any longer and you can't buy them, I think its probably still not commercially viable to make these, so I thought I see about getting some made up for myself or at least try and search for them.
Because every single one is different there is so many of them in the roof frame, it was a lot of work to record every single measurement I thought at least I could record them as I'm sure the measurements will be of use to someone else as well.
Hinge between first & second side rail
A. Bush Inside Diameter
B. Bush Outside Diameter
C. Flange Diameter
D. Flange thickness
E. Bush Length
Hinge between First &
Second Centre Side Rail Bushes
Hinge between first & second side rail has a dowel pin ( 50492) which has interference fit
B. Bush Outside Diameter
A. Bush Inside Diameter
C. Flange Diameter
E. Bush Length
D. Flange thickness
Hinge between first & second side rail has 2 bushes
part numbers (50471)
BALANCE LINK Bushes and Pins
Balance Link part number 50454
with pins, washers and bushes
Lower bushing number 50664, washer, clip and
pin number 378888-S ( NN. 575. A )
B. Bush Outside Diameter
A. Bush Inside Diameter
C. Flange Diameter
D. Flange thickness
E. Bush Length
Eccentric pin end with bushing, wave washer, washer and split pin
B. Bush Outside Diameter
A. Bush Inside Diameter
C. Flange Diameter
D. Flange thickness
E. Bush Length
Second or Centre Side Rail (51154)
Pivot Bolt number 378839-S ( BB. 675. C )
Bushing 531A10
C. Flange Diameter
D. Flange thickness
E. Bush Length
A. Bush Inside Diameter
B. Bush Outside Diameter
No comments:
Post a Comment